OWC Multi-Mount Manual de Instalação descarregar pdf (Página 8)

At the bottom of the memory bay, there are 2 more Phillips screws. They

are a smaller head than the ones inside the memory bay that you just

removed. Use a Phillips #0 screwdriver to remove the screws.

There is one problem. On many machines, the screws were improperly

installed. Instead of using loctite on the screw stando, Apple used loc-

tite on the screws themselves, into the standos - without loctite on the

standos that thread into the Mac Pro’s chassis.

This means, when you try and remove the screws, the standos them-

selves that the screws are screwed into turn. You may need to use a

very thin pair of needlenose pliers, hemostats, or even a thin at blade

screwdriver to hold the hex-shaped stando tight, while you loosen the

Phillips screws.

A photo of this task being made look easy, at least if your screws are not

improperly installed as described above. Try and not strip the Phillips

screw heads.

OWC Multi-Mount Chapter 2 - Mac Pro 667MHz Disassembly

2 MAC PRO 667MHZ DISASSEMBLY

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Sem comentários

OWC Multi-Mount Manual de Instalação Página 8