OWC OWCDIDIMM11D2 Manual de Instalação descarregar pdf (Página 23)

4 Assembly

Using the Torx T8 screwdriver, insert the 3 2mm hex head (the Torx is

the same size as a 2mm or 5/64 hex bit) screws that are used to hold the

bottom cover onto the Mac mini. Again use caution when inserting, Torx

screws are not as strong, do not overtighten.

Insert the 2 Torx T8 screws opposite the Airport antenna. These secure

the bottom hard drive in place.

While making sure to keep the

black Airport cable pointed so it

naturally will lay back under the

chassis, slide the Airport Antenna

cover into the chassis. The edge of

the cover will slip into a channel cut

out for it in the chassis.

Make sure it is straight.

Pivot the Airport antenna cover

gently into the Mac mini as shown.

Turn the black Airport cable so that

the silver connector loops around

from the inside top and attach the

connector onto the Airport card.

The connector snaps straight down

onto the card.

Use caution - it is fragile.

⑭

⑮

⑰⑯

Mac mini 2011-2012 2nd Hard Drive Kit

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Sem comentários

OWC OWCDIDIMM11D2 Manual de Instalação Página 23